Installation Guide

PATIO COVER INSTRUCTION SHEETS
[e-mail]
PATIO COVER INSTRUCTION SHEETS
[e-mail]
LifeRoom Optima Installation Guide
STEP 4G: Once the Edge Beam assembly is LEVEL, take a third Post, hold it against
the Edge Beam in the center location near the Top Post Bracket (#I), and mark a line
on the post along the bottom of the beam. Cut the post above the marked line.
Repeat STEP 4-C to fasten the Post (#J) to the Edge Beam (#F). If you have more than
3 posts, repeat STEP 4-G for the remaining Posts.
STEP 4F: Measuring, Leveling, Cutting, Fastening 3 x 3 Posts (#J) Radius
Corners to Edge Beam (#F) (continued) Using ladders and/or your building
buddies, hold the assembly of the 2 posts and Edge Beam upright. Then, double check
to ensure the Edge Beam is LEVEL. If it is not LEVEL, cut one of your posts to make
that adjustment.