Installation Guide

PATIO COVER INSTRUCTION SHEETS
[e-mail]
PATIO COVER INSTRUCTION SHEETS
[e-mail]
LifeRoom Optima Installation Guide
STEP 5H: Using a 4' level, plumb level
the front side of the Post while the
Post is set in front of the chaulkline.
Have the left male edge of roof panel
in line with the left end of the 3" Edge
Beam. Then, fasten the last section of
the roof panel to the 3" Edge Beam
using one #10x3/4 tek screw. Do not
anchor the Post bottom yet.
STEP 6A: Running the Roof
Panels & Pre-formed Flashing Take
the third Roof Panel, starting on the
RIGHT end, having FEMALE lock on
the right side.
STEP 6B Set the FEMALE lock on top
of the MALE lock of the first panel.
Raise both panels upward so the
bottoms almost touch making a V, then
slowly lower them to lock together.
Check to make sure they are locked
together, then slide the new Roof Panel
into the Hanging Channel tightly
against the Foam Weatherstripping.