Installation Guide

PATIO COVER INSTRUCTION SHEETS
[e-mail]
PATIO COVER INSTRUCTION SHEETS
[e-mail]
LifeRoom Optima Installation Guide
STEP 9A: Attaching Side Fascia
With assistance, hold the Side Fascia
against the house and Front Fascia.
Check to see if you need to trim the
Side Fascia at an angle to fit tightly
against the wall or house fascia.
STEP 9B: Cut and test fit the Side
Fascia against the house wall or fascia.
With a pencil, trace the Front Fascia
onto the Side Fascia, and then cut the
Side Fascia to fit.
STEP 9BB: Fasten two (2) pieces of
the SPACER TUBE 1" x 1" x 7-3/4"
under the TOP LEG of the SIDE
FASCIA using 2 #8 x 1/2" tek screws.
Set the SPACER TUBES at 1/3 and 2/3
of the SIDE FASCIA length.