Installation Guide

PATIO COVER INSTRUCTION SHEETS
[e-mail]
PATIO COVER INSTRUCTION SHEETS
[e-mail]
LifeRoom Optima Installation Guide
The Following Instructions are ONLY for LifeRoom Optimas OVER 16’ Wide.
STEP 12A: Preparing to Splice the
Front Fascia for LifeRoom
Optimas OVER 16’ Lay the Front
Fascias parallel and even on a flat non-
abrasive surface.
STEP 12C: For 30” Splice, hook your
measuring tape on back side of Front
Fascia. Measure 2" and 13" in both
directions of each piece, marking with
a pencil. For 12” Splice, measure 2” and
4” in both directions of each piece.
Then, measure up 3/4" from bottom
and down 3/4" from the top. Mark these
locations with a pencil.
STEP 12B: If you live in the Midwest
or Western U.S. your splice may be 12"
and silver. If you live in the Central or
Eastern U.S. your splice may be 30" and
white. If you have a 30” Splice, measure
and mark at 15” inside the Splice. If you
have a 12” Splice, measure and mark at
6” inside the Splice.