Installation Guide

www.fourseasonsols.com [e-mail]
800-533-0887
LifeRoom Optima
STEP 15: Measure the 3x3 Side Beam.
Measure from the front 3x3 Beam to the
inside of the Receiving Channel against the
house wall, then subtract 1/2“. Cut the 3x3
Beam to that measurement. Slip the 3x3
Beam over the hidden post base against the
Front Beam, and then slide the other end
into the Receiving Channel.
STEP 16: Level and Fasten the 3x3 side
beam Level the 3x3 side beam. Fasten
through the side Beam into the hidden
Post Bracket using 2 #14 tek screws inside
and outside. At house wall, fasten through
the Receiving Channel into the Side Beam
using 2 #14 tek screws inside and outside.
STEP 17: Measure and cut 3x3 posts for
house wall: Measure from the floor to
the bottom of the 3x3 Side Beam, and
then cut the 3x3 post to fit, pushing it
into the Receiving Channel. DO NOT
FASTEN until installing the screen units.
Measure from top of 3x3 Side Beam to
the roof. Cut a short 3x3 Post to fit,
pushing it into the Receiving Channel,
Fasten using 2 #14 tek screws on each
side.
LifeRoom Optima Installation Guide