Installation Guide

www.fourseasonsols.com support@fourseasonsols.com
800-533-0887
LifeRoom Optima
STEP 18: Assembling the
Trapezoid Filler Panel:
a) Measure across the top
of the 3x3 Side Beam
and cut the 1x1 angle to
fit. Line-up the angle
flush with outside edge
of the Side Beam and
fasten using #10 tek
screws spaced every
16".
b) Cut the short piece of
the 1x1 angle for the
short 3x3 Post in the
Receiving Channel &
fasten using #10 tek
screws.
c) Measure, cut and fasten
the 1x1 angle for the
bottom of the roof
panel, in line with the
Side Beam using #10 tek
screws.
LifeRoom Optima Installation Guide