Installation Guide

PATIO COVER INSTRUCTION SHEETS
[e-mail]
PATIO COVER INSTRUCTION SHEETS
[e-mail]
LifeRoom Optima Installation Guide
STEP 1G: Attaching the
Hanging Rail & Channel
(continued) Set the Hanging Rail
against fascia board or wall, and
fasten using the #12x3" SMS screws
through the fascia board into the
truss ends or wall studs.
STEP 1H-1: After the Hanging Rail is
fastened, run a bead of sealant along the top
of the Hanging Rail and caulk all the screw
heads.
STEP 1H-2: Ensure you have 2 screws
within 4” of each end of the Hanging Rail.