Installation Guide

PATIO COVER INSTRUCTION SHEETS
[e-mail]
4/8/2022 8
PATIO COVER INSTRUCTION SHEETS
LifeRoom Optima Installation Guide
STEP 2D: 3” Edge Beam
Preparation continued: Make
sure both halves of the Beam are
straight. Then, fasten through the
Top Post Bracket into the second
Beam, and then into the Beam Splice
using 2 #14x1-1/4 tek screws.
STEP 2E: Rotate the beam over twice,
making sure the beam is straight, then
fasten repeating steps C & D, fastening
through the Top Post Bracket (#I) into both
the Edge Beams and the Beam Splice (#G).
STEP 2F: Rotate the beam over once, so the
Top Post Bracket legs are up. Then, fasten 2
#14x1-1/4" tek screws into each 3" Edge
Beam (4 total).