Pre-Delivery/Install Checklist

 Inspect the individual panels for dings or other damage. If there is a ding on the roof surface, and it is
slight and on one of the sides only, make sure to use this panel with the ding facing toward the sky so it
is not visible.
 If there is significant damage to a panel, email [e-mail] or call 800-533-0887
immediately for a replacement panel, or to answer questions.
 Occasionally, you will have visible glue residue in a brownish-yellow color on the end of the panel(s).
This is just runoff from the factory process and will not affect either the installation process or be
visible at the end of the installation process.
 When unpacking the roof panels stack them out of the way, off the ground on sawhorses and/or stack
the panels flat, horizontally, on the ground (setting them on the packaging and packing material to
prevent scratches or damage).
 Make sure you have all the parts. Open the box at the ends, cutting the straps to gain access to the
materials inside.
 Lay out the parts and check the “Included Materials List” to make sure all the parts are there and
damage-free.
 If there are missing or damaged parts, please email [e-mail] with images and a list of
replacement parts or call 800-533-0887.
 Ensure you have all of the recommended tools on your installation site.
Safety
 Make sure you have an understanding of how to use the power tools. Avoid damaging your house or
the product. Always refer back to the manufacturer’s manual for proper use of power tools.
 You are going to rely on a tape measure. “Measure twice, cut once.”
 Make sure you and your install team look around the site and check to see that there are no potential
hazards, including anything that shouldn’t be exposed or could be tripped on.
 You have the proper safety gear.
 Ladder safety is important.
 You have evaluated the site for potential safety concerns, noting all electrical power lines and electrical
outlets. DO NOT begin this project until the project area is safe.
Having a Game Plan
 Pros have a plan – you should too.
 Know how long the install is going to take and prepare accordingly. This could be a one- to two-day
install. Most of the time you can finish in one day. If it is going to be a two-day install, ensure that the
parts are secure overnight, especially the roof panels.
 Take into consideration how the weather is trending, especially wind and rain. Be aware of weather
conditions, such as heavy winds. If the wind gets too strong, stop; do not attempt to install the roof
panels. If it rains, make sure the parts are covered and kept dry, avoiding electrical outlets and power
tool usage. Prepare for rain and have a plan ready in advance (how will you cover, etc.).
 If you have an installation question, email [e-mail] or call customer service at
800-533-0887. In most cases, we can help correct any issues you are experiencing. Our representatives
are available 9:00 AM to 5:00 PM ET Monday through Friday.