Included Hardware

Plastic Pivot Guide at Track (1)
Top Track (1)
Tools You’ll Need:
• Measuring Tape
• Phillips Screwdriver
• Marking Pencil
• Drill & 3/16” Bit
• Hammer
• Safety Glasses
• Finishing Supplies
(if needed)
Knurled Hinge Pin with Plastic Sleeve (1)
Plastic Top Pivot (2)
Door Aligner (1)
Pull Handle (1)
Bottom Bracket (1)
HARDWARE COMPONENTS FOR 1” BIFOLDS
G
F
B
C
B
DOOR ALIGNER (Part F): This piece to be used only
when combining two sets of bifolds. Attaches with
two Round Top Screws on back side of
Guide doors.
A
D
E
Screws are included with replacement pieces.