Specification

Shower Rods
MATERIALS: 110 tubing is 1" O.D. x .020 (25 gauge) seamless 304 stainless steel,
B110PB tubing is 1" O.D. x .020 (25 gauge) seamless 304 stainless steel,
highly polished and lacquered. Flange material listed under each model number.
INSTALLATION: Install flanges and rod with 4 - #8 x 1-1/4" flat head zinc plated steel screws
provided. Tighten set screws on flanges until rod is secure.
OPTIONAL FASTENER INFORMATION:
Wood blocking is preferable behind all wall surfaces. If wood blocking is not
available, the following fasteners are suggested: Tile/Masonry - Plastic
or Lead Anchors, Plaster/Drywall - Toggle Bolts
SPECIFICATION: Surface mounted shower rod shall be model ____________________________
(fill in model number) by Liberty Hardware Manufacturing Corporation.
SHOWER ROD - 110 SERIES
TECHNICAL DATA
Shower Rods
SHOWER ROD - 185-5BS & 185-6SN
MATERIALS: Shower Rod - 304 Stainless Steel Tube 1" OD.,19 Gauge, Seamless Drawn Tubing
Flange - 304 Stainless Steel
Wall Plate - Steel x 14 Gauge, Nickel Plated
INSTALLATION: Install flanges and rod with 4 - #9 x 2" round head zinc plated
steel screws provided.
OPTIONAL FASTENER INFORMATION:
Wood blocking is preferable behind all wall surfaces. If wood blocking is not
available, the following fasteners are suggested: Tile/Masonry - Plastic or Lead
Anchors, Plaster/Drywall - Toggle Bolts.
SPECIFICATION: Surface mounted shower rod shall be model ____________________________
(fill in model number) by Liberty Hardware Manufacturing Corporation.
6' 1" (25 mm) O.D.
1" (25 mm) O.D.
DIM "B"
5'
6' Shower Rod
5' Shower Rod
DIM "A"MODEL#
2-11/32"
59.5 mm
"A"
"B"
1-1/32"
26.2 mm
3-1/16"
77.8 mm
1"
25 mm
1-3/4"
44 mm
13/16"
21 mm
2-1/4"
57 mm
"A"
"B"
5' , 6' 1" (25 mm) O.D.
1" (25 mm) O.D.
DIM "B"
5' , 6'
110
105
DIM "A"MODEL#
5' , 6' 1" (25 mm) O.D.
B110PB
Liberty Hardware Manufacturing Corporation • 140 Business Park Drive • Winston-Salem, NC 27107 • 800.542.3789 • www.libertyhardware.com
©2009 LHMC, A Masco Company