Installation Guide
Recessed Fixtures
MATERIALS: Stainless steel recessed shells are stamped from 22 gauge corrosion resistant type 304 stainless steel and are polished or satin.
Projecting posts are die cast from highest quality virgin zinc alloy (Zamak) to meet ASTM standard B-86. Die casts are highly polished
and plated with chrome or satin chrome. Roller material as listed under each model number. All rollers are spring actuated. Recessed
shells are pre-assembled using a 14 gauge galvanized steel clip and 4 machine screws.
INSTALLATION: Cut out wall opening 11-3/4" x 5-1/4" x 2" depth (5-1/4" x 11-3/4" x 2" depth for 979). If wood blocking available install recessed shell into
opening using 4 - #8 x 1-1/4" flat head stainless steel screws provided. If wood blocking is not available use 2 optional 600R recessed
wall clamps for each 977 and 2 optional 601R recessed wall clamps for each 979.
SPECIFICATION: Recessed twin paper holder shall be model ____________________________
(fill in model number) by Liberty Hardware Manufacturing Corporation.
RECESSED TWIN PAPER HOLDER
977 & 979
TECHNICAL DATA
Recessed Fixtures
MATERIALS: Paper holder posts are die cast from highest quality virgin zinc alloy (Zamak) to meet ASTM standard B-86.
Die casts are highly polished and chrome plated. Wall plates are 19 gauge zinc plated steel and are installed on
1/8" thick polished aluminum plate with rivets. Roller material as listed under each model number. All rollers are
spring actuated.
INSTALLATION: Mount pre-assembled double roll paper holder with 2 - #9 x 3/4" flat head zinc plated steel screws provided.
OPTIONAL FASTENER INFORMATION:
Wood blocking is preferable behind all wall surfaces. If wood blocking is not available, the following fasteners are
suggested: Tile/Masonry - Plastic or Lead Anchors, Plaster/Drywall - Toggle Bolts.
SPECIFICATION: Surface mounted twin paper holder shall be model ____________________________
(fill in model number) by Liberty Hardware Manufacturing Corporation.
TWIN PAPER HOLDER - 980 SERIES
5-1/2"
140 mm
3-3/8"
85.7 mm
13-1/2"
343 mm
3-3/4"
95 mm
11-1/4"
286 mm
12-5/8"
321 mm
3-3/4"
95 mm
2-5/8"
67 mm
1-3/4"
44 mm
1-7/8"
48 mm
6-1/4"
159 mm
2"
51 mm
4-7/8"
124 mm
Liberty Hardware Manufacturing Corporation • 140 Business Park Drive • Winston-Salem, NC 27107 • 800.542.3789 • www.libertyhardware.com
©2009 LHMC, A Masco Company