Specification Sheet

Towel Bars
140 Business Park Drive • Winston-Salem, NC 27107
800.542.3789 • T 336.769.4077 • F 336.769.1839
www.libertyhardware.com
MATERIALS: Post - Zinc Die Cast
18”, 24”,and 30” Square Bar - Aluminum; 22 Gage
Wall Plate - Steel; 20 Gage; Zinc Plated
INSTALLATION: Mount 2 wall plates at 17 5/8 ” C-C for 18” bar, 23 5/8” C-C for
24” bar, and 29 5/8” C-C for 30” bar with 4 #8 x 1-1/4” round head zinc plated steel screws and plastic
anchors provided.
Slip towel bar posts over the wall plates and tighten set screws until secure.
OPTIONAL
FASTENER
INFORMATION: Wood blocking is preferable behind all wall surfaces. If wood
blocking is not available, the following fasteners are suggested:
Tile/Masonry - Plastic or Lead Anchors;
Plaster/Drywall - Toggle Bolts.
SPECIFICATION: Surface mounted towel bar shall be model _____________
(fill in model number) by Liberty Hardware Manufacturing Corporation.
1 7/8
2 5/16
3 1/4
3/4
A
B
18"
24"
30"
17 5/8
A
B
19 15/16
23 5/8
25 15/16
29 5/8
31 15/16
TECHNICAL DATA
Effective September 2006
FUTURA
®