Operation Manual

6
➤ Opening Your Unit
To open your unit, push the latch on
the lid towards the back of the unit
and lift up.
➤ Removing Book Cards
Warning: Never install or remove a
book card while your unit is on. Any
information that was entered in the built-
in book or book card will be erased.
1. Turn your unit off.
2. Turn your unit over.
3. Align the tabs on the book card
with the notches in the slot.
4. Press the book card down until it
snaps into place.
Once a book card is installed in the unit, you
can select which book you want to use.
1. Turn your unit on.
2. Press
card .
These are sample books.
3. Press
or to highlight your
selection.
For information on available Franklin
BOOKMAN products, select
.
4. Press
enter to select it.
Installing Book Cards
Selecting a Book
➤ About Screen Illustrations
Some screen illustrations in this User’s
Guide may differ slightly from what you
see on screen. This does not mean that
your unit is malfunctioning.