Operation Manual

5
Your MWD-400 is powered by two CR2032,
3-volt batteries. Follow these instructions to
install or replace them.
Warning: If the batteries wear out
completely, or if you take more than
approximately one minute while changing the
batteries, any user-entered information will be
erased. You should always keep written
copies of your important information.
1. Turn the unit over.
2. Lift the battery cover on the back of
your MWD-400 by pushing it in
the
direction of the arrow.
3. Install the batteries positive side
facing up.
4. Replace the battery cover.
Installing Batteries
When using this dictionary, you can
adjust the screen contrast, the shutoff
time, and the type size. The shutoff
time is how long your MWD-400 stays
on if you forget to turn it off.
1. Press
setup
.
2. Use the arrow keys to highlight
Contrast, Shutoff, or Type Size in
the Settings menu.
3. Press
enter
.
4. Press or to highlight a
new setting and press
enter
to
select it. Press
back
to leave the
setting unchanged.
Changing the Settings
➤ Follow the Arrows
The flashing arrows on the right of
the screen show which arrow keys
you can press to move around
menus or view more text.