Installation Guide

V1 9/2018
2
NOTE: The figurine will begin movement when the sensor detects someone is more than 20 inches away.
Warnings
1. This product is for decoration only and is not a toy. Please keep out of reach of small children.
2. Do not position the figurine near candles, sources of heat, or in direct sunlight.
3. The figurine cannot be connected to the power supply directly.
4. Do not break, cut, or alter the power cable.
5. Do not attempt to repair the wiring with staples or nails.
6. Do not place the cable under a carpet or rug as it may get damaged.
7. Ensure that the cable is in a secure location where it is not a hazard.
8. Do not connect the figurine to the power supply while it is still in the packaging.
9. Please switch off the transformer when not in use.
10. Do not leave figurine unattended while operating in the ON position.
11. Do not over load the transformer.
12. Figurine should be on a level, stable surface to prevent it from falling over.
Storage tips: You may want to save the carton for storing your figurine. Store in a cool, dry area where the
temperature does not exceed 100⁰F.