User's Manual
Table Of Contents
- 1 Device pinout
- 2 Device terminal functions
- 3 Electrical Characteristics
- 4 Radio Characteristics
- Firmware versions
- 5 Device terminal description
- 6 Application information
- 7 Package information
- 8 Certifications
- 9 RoHS And REACH Statement
- 10 Tape and Reel information
- 11 Ordering information
- 12 Document history
- Acronyms and definitions
Rev: e
© 2030 Free2move AB
Page 15(45)
Extended range Bluetooth
Module - F2M03GXA
Datasheet
4.1.3 Performance
The WU firmware is a complete on-chip application; limited resources restrict the maximum throughput. The
table below shows the maximum achieved throughput when streaming data between two connected WU
v4.00 devices at close range.
Direction Baud Rate
Maximum
Throughput (kbit/s
(throughput mode))
Maximum
Throughput (kbit/s)
(latency mode)
Master to Slave 57600 ~57.6 ~57.6
Slave to Master 57600 ~57.6 ~57.6
Full duplex 57600 ~57.6 ~50.5
Master to Slave 115200 ~115.1 ~93.9
Slave to Master 115200 ~115.1 ~79.6
Full duplex 115200 ~114.5 ~42.0
Master to Slave 230400 ~223.1 ~158.0
Slave to Master 230400 ~221.4 ~117.7
Full duplex 230400 ~172.7 ~86.2
Master to Slave 460800 ~228.6 ~206.7
Slave to Master 460800 ~222.7 ~154.1
Full duplex 460800 ~173.3 ~109.8
Master to Slave 921600 ~240.1 ~235.7
Slave to Master 921600 ~235.4 ~186.0
Full duplex 921600 ~174.7 ~150.5
4.1.4 Configuration
The F2M03 can either be configured using hex commands described in the document
“Wireless_UART_protocol.pdf” or using the Windows configuration software. The configuration software
can be downloaded from www.free2move.net