Instructions / Assembly

MAINTENANCE

Inspect and tighten all parts of the elliptical regularly.

Replace any worn parts immediately.

To c le an th e e ll i pt ic a l, us e a d am p c lot h a nd a sm all

amount of mild soap. IMPORTANT: To avoid damage

to the console, keep liquids away from the console

and keep the console out of direct sunlight.

CONSOLE TROUBLESHOOTING

If the console does not display your heart rate when

you hold the handgrip heart rate monitor, or if the dis-

played heart rate appears to be too high or too low, see

step 5 on page 16.

If a replacement power adapter is needed, call the

telephone number on the cover of this manual.

IMPORTANT: To avoid damaging the console, use

only a manufacturer-supplied regulated power

adapter.

GREASING THE KNUCKLE BEARINGS

For the elliptical to function correctly, the knuckle

bearings must be greased every three months.

Before you grease the knuckle bearings, unplug

the power adapter.

See assembly step 7 on page 9. Remove the Left

and Right Pivot Covers (61, 62) from the Right and Left

Upper Body Legs (26, 34).

Next, load a grease gun (not included) with high-quality

multi-purpose extreme-pressure (EP) grease (not

included).

Then, attach the coupler on the grease gun to the

grease fitting (A) on a Knuckle Bearing (28) and

pump grease into the Knuckle Bearing until you see

the grease squeeze out of the edges of the Knuckle

Bearing.

Remove the coupler from the grease fitting. Repeat

these actions to grease the other Knuckle Bearing

(28). Then, wipe off the Knuckle Bearings with a cloth,

and reattach the parts that you removed.

MAINTENANCE AND TROUBLESHOOTING