Installation Guide

 Page 12
FUNCTIONALITY AND FEATURES
If the air conditioner turns o unexpectedly due
to loss of power, it will restart automatically with
the previously set functions when power is
restored.
If frost builds up on the evaporator coils, the unit
will enter Auto Defrost mode. The compressor will
cycle o and the fan will continue to run until the
frost disappears.
Press the ENERGY SAVER button on the remote
control to activate Energy Saver mode. This function
allows the fan to run for 3 minutes after the
compressor turns o at your desired set temperature.
The fan will then cycle on every 10 minutes for 2
minutes to maintain the set temperature. If the room
temperature rises, the compressor will turn back on
and cooling will resume
This air conditioner features a shine-through plastic
lighted display. The display will brighten when
operations are selected or changed. It will
automatically dim after 10 seconds of inactivity.
To turn the display completely o, press the
LED button on the remote control
Press the SHORTCUT button on your remote
control to set the air conditioner to all of your
favorite settings with the touch of one button.
NOTE: One the unit is turned o, opertaion
cannot be restarted for 3 minutes.
Press POWER button on unit or remote
control to turn unit on or o. The unit will
start automatically in Cool mode with Energy
Saver functionality active.
Press MODE button on unit or remote to
select between cool and fan modes.
After 250 hours of operation, the lter indicator
light illuminates. This feature is a reminder to
clean the Air Filter for more ecient operation.
Press the MODE button for 3 seconds to cancel
the reminder.
Press + / - UP/DOWN buttons on unit or remote
control to change temperature setting under
cool mode. The set temperature will be
automatically maintained anywhere between
62
°F (17°C) and 86°F (30°C).
On fan mode,the display will show the actual
room temperature.
NOTE: Press and hold + and - buttons together
for 3 seconds will alternate the temperature
display between the
°C & °F scale.
Press the FAN SPEED button on the remote
control to select between Low, Medium, High,
or Auto fan speeds.
Press the SWING button on the remote control
and hold for 2 seconds to turn on oscillation.
To adjust the angle of air ow, press the SWING
button repeatedy until the desired angle is
reached.
Press the SLEEP button on the remote control
to activate Sleep Mode. Sleep Mode allows the
air conditioner to slowly raise the temperature
of your room overnight to conserve energy.
Press the TIMER ON button on the remote
control to set a specic time for the unit to come
on. Press the TIMER OFF button on the remote
control to set a specic ime for the unit to turn
o.
Air Conditioner
Features