Installation Manual Ceiling Concealed Duct

OPTIONAL OPERATION

ENGLISH

TEMP

FAN

SPEED

OPER

MODE

When pressing the button and button

simultaneously for more than 3 seconds, the

system will be entered into the installer setting

mode.

- After entering into the installer setting mode,

select the ceiling height setting code value by

pressing the oper-mode button.

* Celsius/Fahrenheit setting code value : 07

Select the desired setting value with the

temperature up(▲), down(▼) button.

When pressing button, currently

established celsius/Fahrenheit setting value

will be set up.

When pressing the button and button

simultaneously for more than 3 seconds after the

setting has been completed, the setting mode

will be released.

- If there isn’t any button input for more than 25

seconds, the installer setting mode will also be

released.

OPER

MODE

Code value

*Setting value

00:Celsius

01:Fahrenheit

OPER

MODE

Value

• Whenever press temp up(▲), down(▼) button in Fahrenheit mode, the temperature will

increase/drop 2 degrees.

Installer Setting-Celsius / Fahrenheit Switching

This function is used for switching the display between Celsius and Fahrenheit.