PRODUCT PROFILE PRODUCT PROFILE VERT-I-PAK ® Single Package Vertical Heat Pumps 18000 & 24000 BTU models use secondary gravity-fed drain (VPDP2).
CHASSIS SPECIFICATIONS MODEL K-Series models 230/208V, R-Series models 265V VHA09K VHA09R VHA12K VHA12R VHA18K VHA18R VHA24K VHA24R TOTAL COOLING CAP. 9300 9300 11500 11500 18400 18400 22500 22500 SENSIBLE COOL CAP. 7440 7440 9085 9085 13430 13430 15750 15750 POWER (W) 845 845 1045 1045 1670 1670 2045 2045 11.0 11.0 COOLING DATA EER HEATER SIZE (kW) 11.0 11.0 11.0 11.0 11.0 11.0 2.5/3.4/5.0 2.5/3.4/5.0 2.5/3.4/5.0 2.5/3.4/5.0 2.5/3.4/5.0 2.5/3.4/5.0 2.
SMALL CHASSIS ELECTRICAL DATA ELECTRICAL DATA VHA09K HEATER WATTS 2050-2500 2780-3400 VHA12K 4090-5000 VOLTAGE 2050-2500 2780-3400 4090-5000 208-230 ELECTRIC HEATING BTU 7000-8500 9500-11600 13900-17000 7000-8500 9500-11600 13900-17000 ELEC. HEATING CURRENT (AMPS) 11.1-12.0 14.6-16.0 20.9-22.9 11.1-12.0 14.6-16.0 20.9-22.9 15.0 20.0 29.2 15.0 20.0 29.2 MINIMUM CIRCUIT AMPACITY BRANCH CIRCUIT FUSE (AMPS) LRA-COMPRESSOR (AMPS) BASIC HEATER SIZE 15 20 30 15 20 30 21.0 21.
LARGE CHASSIS ELECTRICAL DATA ELECTRICAL DATA VHA18K HEATER WATTS 2050-2500 2780-3400 VHA24K 4090-5000 2050-2500 VOLTAGE 2780-3400 4090-5000 6135-7500 8180-10000 208-230 ELECTRIC HEATING BTU 7000-8500 9500-11600 13900-17000 7000-8500 9500-11600 13900-17000 ELEC. HEATING CURRENT (AMPS) 11.1-12.0 14.6-16.0 20.9-22.9 11.3-12.3 14.8-16.2 21.1-23.1 30.9-34.0 40.7-44.9 15.0 20.0 29.2 15.4 20.3 29.0 42.6 56.
AIRFLOW DATA Indoor CFM & External Static Pressure Model VHA09/VHA12 Fan Speed VHA18 Low High Low 0.0” 470 520 0.05” 460 0.10” 430 0.15” 0.20” VHA24 High Low High 730 800 755 805 510 670 735 700 750 490 630 675 660 700 410 470 595 640 615 665 360 440 550 600 575 625 0.25” 310 400 505 550 525 580 0.30” 260 350 455 500 485 540 0.35” -- -- 400 445 450 500 0.
UNIT CHASSIS DIMENSIONS - VHA09 & VHA12 Front Side 23 1/8” Rear 23 1/8” 10” SUPPLY AIR DUCT DIAMETER 2 15/16” 10 1/8” CONDENSER INLET AIR 29 1/2” RETURN AIR 29 1/2” CONDENSER EXHAUST AIR 1 1/2” UNIT TOP VIEW DIMENSIONS Outside Wall 6 31” 19 1/2”
UNIT CHASSIS DIMENSIONS - VHA18 SUPPLY AIR 10” DUCT DIAMETER ELECTRICAL ENTRY BOTH SIDES 5 1/16” 2 3/16” 2 1/2 Lorem ipsum 11 11/16” RETURN AIR CONDENSER INLET AIR 39 3/4” 42 5/8” 47 15/16” 31” CONDENSER EXHAUST AIR FRONT SIDE 1 1/2” REAR UNIT TOP VIEW DIMENSIONS 22 5/16" control box electrical entrance 8 3/8" 6 3/16" 4 3/16" 5 5/16" 7 3/16" 7
UNIT CHASSIS DIMENSIONS - VHA24 SUPPLY AIR 20 5/8" DUCT ELECTRICAL ENTRY BOTH SIDES 6 55/64" DUCT 5 1/6" 1" DUCT 15 11/16" 2 1/2" RETURN AIR 46 11/16" 51 3/4" CONDENSER INLET AIR 44 CONDENSER EXHAUST AIR 31" 1 1/2" FRONT SIDE REAR UNIT TOP VIEW DIMENSIONS 12 19/64" 1 1/2" PART NO.
EXTENDED COOLING PERFORMANCE OUTDOOR DRY BULB TEMP. (DEGREES F AT 40% R.H.) 75 85 95 105 115 INDOOR WET BULB TEMP. (DEGREES F AT 80 F D.B.) VHA09K VHA12K VHA18K VHA24K VHA09R VHA12R VHA18R VHA24R 62 67 72 62 67 72 62 67 72 62 67 72 62 67 72 BTUH 9485 10084 10408 8949 9776 10216 8427 9300 9879 7914 8686 9409 7373 7986 8821 WATTS 728 738 745 773 789 798 820 845 858 876 904 923 938 965 991 AMPS 3.6 3.6 3.6 3.7 3.8 3.8 4.0 4.1 4.2 4.3 4.
INSTALLATION OVERVIEW VHA09 & VHA12 Applicable Models VHA09K VHA09R VHA12K VHA12R Louver VPAL2/VPSC2 (Sold separately) Part A Outside Wall Plenum Exterior/ Outside Wall Filter (14” x 20”) Part B Inside Wall Plenum Unit VPAWP1-8 = 5 1/2" - 8" D x 24 1/8" W x 30 3/8" H VPAWP1-14 = 8" - 14" D x 24 1/8" W x 30 3/8" H INSTALLATION OVERVIEW VHA18 Applicable Models VHA18K VHA18R Large Chassis Unit (Unit height 47”) Louver VPAL2/VPSC2 (Sold separately) Part A Outside Wall Plenum Exterior/ Outside Wall Filte
INSTALLATION OVERVIEW VHA24 Applicable Models VHA24K VHA24R Louver VPAL2/VPSC2 (Sold separately) Filter (18” x 20”) Part A Outside Wall Plenum Exterior/ Outside Wall Part B Inside Wall Plenum Unit VPDP2 drain pan required (Sold & shipped separately) VPAWP1-8 = 5 1/2" - 8" D x 24 1/8" W x 30 3/8" H VPAWP1-14 = 8" - 14" D x 24 1/8" W x 30 3/8" H INSTALL HEIGHT 3/4” NOTE: The distance between the rough opening and the finished floor/platform must be 3/4”.
INSTALLATION OVERVIEW CLOSET ORIENTATIONS AND DIMENSIONS )URQW ,QVWDOODWLRQ 7RS 9LHZ 23 1/8" 26 1/8" 23 1/8" 3" 27" 29 1/8" /HIW ,QVWDOODWLRQ 7RS 9LHZ 3 23 1/8" 27" 23 1/8" 31 1/8"
TYPICAL UTILITY CLOSET Chassis shown in closet on optional platform 25" x 20" Filter (Field Supplied) Rigid Ductwork Electrical Connection Exterior Wall Flexible Ductwork VPAWP1-8/1-14 Wall Plenum VPRG4/VPRG4R Access Panel and Return Air Filter Grille Thermostat Wiring Power Disconnect Recommended eld installed drain pan 3/4" FPT Drain Connection Chassis installs 2 3 / 8" into Plenum VPAWP1-8/1-14 Wall Plenum cut-out dimensions 24 5/8" wide x 30 7/8" high.
ACCESSORIES DIMENSIONS VPAL2 / VPSC2 Louver Architectural Louver VPAL2/VPSC2 25-9/16” 31-1/16” VPAWP1-8 Wall Plenum Cutout Dimensions: B 24-5/8" W x 30-7⁄8”H 24-1/8" A 30-3/8" Wall Plenum VPAWP1-8 - telescopes from 5-1/2” to 8” VPAWP1-14 - telescopes from 8” to 14” 14
Application and Installation Installation Guidelines Typical Closet Arrangement • Chassis is to be installed against an exterior wall. Wall cutout dimensions will be 24 5/8" w x 30 7/8" h. Cutaway of a typical closet shown with Vert-I-Pak® chassis installed in the wall sleeve. The unit has the thermostat, field wiring, internal drain and flex duct attached. VPRG4 return air filter holder and access panel are shown below.
REQUIRED ACCESSORIES ARCHITECTURAL LOUVER VPAL2 and VPSC2 Extruded aluminum grille that attaches to the outdoor section of the wall plenum. Takes in fresh air and returns condensed air. VPSC2 can be ordered in custom colors. VPDP2 DIMENSIONS: 25 9/16" W x 31 1/16" H WALL PLENUM VPAWP1-8, VPAWP1-14 Two-part sleeve that telescopes in and out. Sits inside the exterior wall penetration.
HVAC Engineering Specifications A-Series Vertical Packaged Air Conditioners & Heat Pumps Cooling: 9300 – 22500 Btu Friedrich Models: VHA – Heat Pump with electric heat Heating: 8300 – 19500 Btu (Heat Pump) 8500 – 34130 Btu (Electric Heat) All units shall be factory assembled, piped, wired and fully charged with R-410A. All units shall be certified in accordance with ARI Standard 390 for Single Packaged Vertical Air Conditioners and Heat Pumps. Units shall be ETL listed and carry a ETL label.
Vert-I-Pak® Single Package Heat Pumps PURCHASER P.O.
Friedrich Air Conditioning Company 10001 Reunion Place, Suite 500 San Antonio, Tx 78216 800.541.6645 www.friedrich.com VERT-I-PAK® A SERIES SINGLE PACKAGE VERTICAL AIR CONDITIONERS LIMITED WARRANTY SAVE THIS CERTIFICATE. It gives you specific rights. You may also have other rights which may vary from state to state and province to province. In the event that your unit needs servicing, contact your nearest authorized service center.
Friedrich Air Conditioning Co. l 10001 Reunion Place, Suite 500 l San Antonio, TX 78216 l 877.599.5665 l www.friedrich.