Specifications Sheet

INSTALLATION SPECIFICATIONS
•
Product Shipping Weight (approx.) – 115 Lbs.
•
Single phase 3- or 4-wire cable, 120 / 240 or 120 / 208 Volt, 60 Hertz AC
only electrical supply with ground required on separate circuit fused on both
sides of line.
•
Connected Load (kW Rating) @ 240 / 208 Volts = 3.7 / 2.8 kW
•
Amps @ 240 / 208 Volts = 15.4 / 13.5 Amps
•
Recommended Circuit Breaker – 20 Amps
•
Always consult local and national electric codes.
•
Minimum 21" clearance for oven door depth when open.
•
Minimum required distance from floor is 4-1/2", recommended distance is 31".
•
Minimum 24" deep cutout dimension is critical for proper installation,
to ensure that oven’s faceplate will fit flush against cabinet front.
•
To adapt oven to fit cutout height greater than 27-5/8", add one 2"-wide
wood shim of appropriate height to each side of opening under oven side rails.
Lifting oven will hide larger cutout opening at top and oven’s bottom trim
will hide shims at bottom.
•
Full oven base of solid plywood or similar material required,
capable of supporting 150 Lbs.
•
Base must be level and cabinet front must be square.
•
Single Wall Oven is NOT approved to be used in stackable or
side-by-side installation.
•
Single Wall Oven is approved to be used in under-counter installation.
•
Single Wall Oven is NOT approved to be used in under-cooktop installation.
OPTIONAL ACCESSORIES
•
10'-Long Armored Power Cable – (PN # 903056-9010).
Specifications subject to change. Accessories information available on the web at frigidaire.com
Note: For planning purposes only. Always consult local and national electric, gas and plumbing codes.
Refer to Product Installation Guide for detailed installation instructions on the web at frigidaire.com.
USA
•
10200 David Taylor Drive
•
Charlotte, NC 28262
•
1-800-FRIGIDAIRE
•
frigidaire.com
CANADA
•
5855 Terry Fox Way
•
Mississauga, ON L5V 3E4
•
1-800-265-8352
•
frigidaire.ca
FFEW2426U 05/18
© 2018 Electrolux Home Products, Inc.
24" Single Electric Wall Oven (U Model)
Baseline
*Critical dimension – MUST be applied
**For cutout height greater than 27
5
/ 8 ", add one
2"-wide wood shim of appropriate height to each
side of opening under oven side rails.
Electrical
junction
box location
2" max.
Full base
required
to support
150 lbs.
4" x 4"
opening
to route
armored
cable
3"
max.
1
1
/2"
min.
27
5
/8"
min.
28"
max.
23
1
/2" min.*
(critical
dimension)
2"-wide wood
spacers
(if needed)**
31"
suggested
distance
4
1
/2"
min.
required
24
"
min.
22"
min.
22
1
/2" max.
21
3
/4"
23
7
/8"
31
7
/16"
(includes
bottom
trim)
Spacer
25
3
/16"
Allow at least
21" clearance
for door depth
when open
Power
supply
location
(left bottom
rear)
27
1
/2"
min.
29
1
/8"
max.
FFEW2426U S/W/B
SINGLE WALL OVEN
24" ELECTRIC