Use and Care

7
IMPORTANT
Place door on padded surface to avoid damage.
6. Open the refrigerator door and remove.
Set door aside.
7. Remove the three center hinge screws
using a T20 Torx Head screwdriver and set
center hinge aside (see Figure 2).
5. Unscrew the center hinge pin using an
adjustable wrench and set aside (see
Figure 2).
8. Remove the door stopper screw using a
T25 Torx Head screwdriver and remove
door stopper (see Figure 3).
9. Unscrew the bottom hinge pin using an
adjustable wrench (see Figure 3).
10. Remove the bottom hinge cover on the
opposite side and install the bottom hinge
pin in the left hand hole.
11. Install the door stopper removed in step 8.
12. Install the bottom hinge cover on the
opposite side.
13. Gently remove the three center hinge hole
covers (see Figure 4A) and install on the
opposite side of the cabinet (see Figure
4B).
DOOR REMOVAL/REVERSAL INSTRUCTIONS
(SOME MODELS)
14. Pry out the center hinge bearing from the
top of the refrigerator door with a straight
screwdriver (see Figure 5).
15. Pry out the center hinge bearing plug from the
opposite side of the refrigerator door with a
straight screwdriver (see Figure 5).
16. Install the center hinge bearing in place of
the plug removed in previous step.
17. Install the center hinge bearing plug on the
opposite side of the door.
Hinge
Pin
Center
Hinge
Screws
(3)
Hinge
Hole
Plug
Hinge
Bearing
Autocloser-
Hook
Autocloser-
Screw
Figure 2
Hinge
Bearing
Autocloser-
Hook
Autocloser-
Screw
Door
Stopper
Bottom Hinge
Pin
Figure 3
A
B
Figure 4
Figure 5