Complete Owner's Guide

4
FEATURES AT A GLANCE
Your dishwasher cleans by spraying a mixture of hot water and detergent through the spray arms
against soiled surfaces. First, the dishwasher drains for a few seconds to remove soils dropped while
loading, then lls with water covering the lter area. Water is then pumped through the spray arms.
Soil particles go through and across the lter and down the drain as the water is pumped out. This
series of steps are repeated as needed. The number of water lls varies with the cycle being used.
To Start a Cycle
When cycle and options are selected, LEDs of selected cycle and options are illuminated. The status
window displays the cycle time and then displays ‘Press Start’.
To start the cycle, press START/CANCEL pad and close the dishwasher door immediately.
The status window displays ‘Close’ after the START/CANCEL pad is pressed.
A tone will sound indicating the cycle is successfully started after door is closed.
Features may vary according to model.
Rinse Aid
Dispenser
Tub Gasket
Middle Spray
Arm
Lower Rack
Lower Spray
Arm
Detergent
Dispenser
Spray Arm
Upper Rack
Silverware
Basket
Filter
Serial Label
(located on
right side of
door)
Third level rack