Product Specifications Sheet
Accessories information available
on the web at frigidaire.com
USA
•
10200 David Taylor Drive
•
Charlotte, NC 28262
•
1-800-FRIGIDAIRE
•
frigidaire.com
CANADA
•
5855 Terry Fox Way
•
Mississauga, ON L5V 3E4
•
1-800-265-8352
•
frigidaire.ca
FFEW2415Q 12/16 © 2016 Electrolux Home Products, Inc.
Specifications
subject to change.
Single Wall Ovens
FFEW2415Q W/B 24" Electric
Single Wall Oven Specifications
•
Product Shipping Weight (approx.) – 115 Lbs.
•
Single phase 3- or 4-wire cable, 120 / 240 or 120 / 208 Volt, 60 Hertz
AC only electrical supply with ground required on separate circuit
fused on both sides of line.
•
Connected Load (kW Rating) @ 240 / 208 Volts = 3.7 / 2.8 kW
•
Amps @ 240 / 208 Volts = 15.4 / 13.5 Amps
•
Recommended Circuit Breaker – 20 Amps
•
Always consult local and national electric codes.
•
Minimum 21" clearance for oven door depth when open.
•
Minimum required distance from floor is 4-1/2", recommended
distance is 31".
•
Minimum 24" deep cutout dimension is critical for proper installation,
to ensure that oven’s faceplate will fit flush against cabinet front.
•
To adapt oven to fit cutout height greater than 27-5/8", add one
2"-wide wood shim of appropriate height to each side of opening
under oven side rails. Lifting oven will hide larger cutout opening at
top and oven’s bottom trim will hide shims at bottom.
•
Full oven base of solid plywood or similar material required,
capable of supporting 150 Lbs.
•
Base must be level and cabinet front must be square.
•
Single Wall Oven is NOT approved to be used in stackable or
side-by-side installation.
•
Single Wall Oven is approved to be used in under-counter installation.
•
Single Wall Oven is NOT approved to be used in under-cooktop
installation.
Note: For planning purposes only. Refer to Product Installation Guide
on the web at frigidaire.com for detailed instructions.
24" Single Electric Wall Oven
Baseline
*Critical di
mension – MUST be applied
**
F
or cutout height greater
t
han 27
5
/
8
",
add one
2"-wide wood shi
m of appropriate hei
ght
t
o each
side of opening under oven side rails.
Electrical
junction
box location
2" max.
Full base
required
to support
150 lbs.
4" x 4"
opening
to route
armored
cable
3"
max.
1
1
/2"
min.
27
5
/8"
min.
28"
max.
24"
min.*
(critical
dimension)
2"-wide wood
spacers
(if needed)**
31"
suggested
distance
4
1
/2"
min.
required
24
"
min.
22"
min.
22
1
/2"
max.
21
3
/4"
23
7
/8"
31
7
/16"
(includes
bottom
trim)
Spacer
25
3
/16"
Allow at least
21" clearance
for door depth
when open
Power
supply
location
(left bottom
rear)
27
1
/2"
min.
29
1
/8"
max.