Service Data Sheet

1
This service data sheet is intended for use by persons having electrical and mechanical training and a level of
knowledge of these subjects generally considered acceptable in the appliance repair trade. The manufacturer
cannot be responsible, nor assume any liability, for injury or damage of any kind arising from the use
of this data sheet.
SAFE SERVICING PRACTICES
To avoid the possibility of personal injury and/or property damage, it is important that safe servicing practices be
observed. The following are some, but not all, examples of safe practices.
1. Do not attempt a product repair if you have any doubts as to your ability to complete it in a safe and
satisfactory manner.
2. Before servicing or moving an appliance, remove power cord from electric outlet, trip circuit breaker to Off, or
remove fuse.
3. Never interfere with the proper installation of any safety device.
4. USE ONLY REPLACEMENT PARTS SPECIFIED FOR THIS APPLIANCE. SUBSTITUTIONS MAY DEFEAT
COMPLIANCE WITH SAFETY STANDARDS SET FOR HOME APPLIANCES.
5. GROUNDING: The standard color coding for safety ground wires is GREEN OR GREEN WITH YELLOW STRIPES.
Ground leads are not to be used as current carrying conductors. IT IS EXTREMELY IMPORTANT THAT THE
SERVICE TECHNICIAN REESTABLISH ALL SAFETY GROUNDS PRIOR TO COMPLETION OF SERVICE. FAILURE TO
DO SO WILL CREATE A POTENTIAL HAZARD.
6. Prior to returning the product to service, ensure that:
 • Allelectricconnectionsarecorrectandsecure.
 • Allelectricalleadsareproperlydressedandsecuredawayfromsharpedges,high-temperature 
components, and moving parts.
 • Alluninsulatedelectricalterminals,connectors,heaters,etc.areadequatelyspacedawayfrom 
all metal parts and panels.
 • Allsafetygrounds(bothinternalandexternal)arecorrectlyandsecurelyreassembled.
 • Allpanelsareproperlyandsecurelyreassembled.
NOTICE
SERVICE DATA SHEET 318047459 (0910) Rev. A
Appliance with Electronic Oven Control
IMPORTANT NOTES
1. This unit includes an Electronic Oven Control board.
2. The included board is not field repairable.
3. The oven temperature can be calibrated, see Use and Care Manual.
4. The pin on board connectors indicates pin number 1.
DATA SHEET ABBREVIATIONS AND TERMINOLOGY
EOC : Electronic Oven Control
LED: Light-EmittingDiode
MDL : Motor Door Latch
DLB : Double Line Break
RTD : Resistance Temperature Detector / Oven Probe