Complete Owner's Guide

9
IMPORTANT
Before you begin, turn the appliance tem-
perature control to OFF and remove the
electrical power cord from the wall outlet.
Remove any food from the door shelves.
DOOR REMOVAL/REVERSAL
1. Keep the 2 plastic door spacers
between the door and the cabinet as
shown below. The spacers are used
to make sure the distance between
the door and cabinet is ½ inch.
2. Lay the freezer on its back on a
padded surface.
3. Unscrew the right adjustable leveling
foot (A). Remove the 4 screws (B)
holding the bottom hinge (C) to
the cabinet with an 8 mm socket
with ratchet. Screw the adjustable
leveling foot back into the cabinet
hole (D).
x4
B C
A
Bottom of Unit
Bottom of Unit
D
4. Unscrew the door stopper on the
right side with a Phillips screwdriver
and pry o the stopper with a flat-
head screwdriver. Then screw it on
the left side.
6. Unscrew the left adjustable leveling
foot and loosen the screw.
Bottom of Unit
5. Unscrew and insert the hinge pin on
the opposite side of the bottom hinge
using an adjustable wrench and pliers.
Φ10
CAUTION
This procedure will require 2 people to
safely perform.