Specifications

Specifications
subject to change.
USA
•
10200 David Taylor Drive
•
Charlotte, NC 28262
•
1-800-FRIGIDAIRE
•
frigidaire.com
CANADA
•
5855 Terry Fox Way
•
Mississauga, ON L5V 3E4
•
1-800-265-8352
•
frigidaire.ca
FFHD2250T 06/17 © 2017 Electrolux Home Products, Inc.
French Door Refrigerator Specifications
•
Product Shipping Weight (approx.) – 365 Lbs.
•
An electrical supply with grounded three-prong receptacle is
required. The power supply circuit must be installed in accordance
with current edition of National Electrical Code (NFPA 70) and
local codes & ordinances.
•
Voltage Rating – 115V / 60 Hz
•
Connected Load (kW Rating) @ 115 Volts = 1.02 kW
•
Amps @ 115 Volts = 8.5 Amps
•
Always consult local and national electric & plumbing codes.
•
Floor should be level surface of hard material, capable of supporting
fully loaded refrigerator.
•
When installing refrigerator adjacent to wall, cabinet or other appliance
that extends beyond front edge of unit, 20" minimum clearance
recommended to allow for optimum 120° to 180° door swing, providing
complete drawer / crisper access and removal. (Absolute 4-1/2"
minimum clearance will ONLY allow for 90° door swing which will
provide drawer / crisper access with restricted removal.)
•
To ensure optimum performance, avoid installing in direct sunlight or
close proximity to range, dishwasher or other heat source.
•
For proper ventilation, front grille MUST remain unobstructed.
•
Recess electrical outlet when possible.
•
Water recess on rear wall recommended to prevent water line damage.
•
Water Pressure – Cold water line must provide between 30 and 100
pounds per square inch (psi).
•
Copper tubing with 1/4" O.D. recommended for water supply line
with length equal to distance from rear of unit to household water
supply line plus 7 additional feet. Optional Water Supply Installation
Kits available.
•
Adjustable front rollers to assist with door alignment. Adjustable
rollers are not removable.
“Built-In Look” Specifications
•
Minimum opening of 70-1/4" H x 36" W x 25" D required to allow for
ease of installation, proper air circulation, and plumbing / electrical
connections.
•
Remove all wall / floor molding prior to installation.
Note: For planning purposes only. Refer to Product Installation Guide
on the web at frigidaire.com for detailed instructions.
Counter-Depth French Door Refrigerators
(23 Cu.Ft.) Frigidaire Gallery
Counter-Depth French Door Refrigerators
(23 Cu.Ft.) Frigidaire Professional
Top View
24"
Cabinet
25" Side Panels,
1
/2" min. width
25"
Countertop
Allow 1" min. clearance at rear
for proper air circulation and
water
/ electrical connections
Recessed
water line
Recessed
electrical outlet
“Built-In Look”
Cutout Dimensions
(A) 70
1
/4" (B) 36" (C) 25"
5"
31"
68
5
/8"
with
3
/8"
rollers
28
1
/2"
23
7
/8"
69
7
/8"
with
3
/8"
rollers
Power
cord
location
(right
bottom
rear)
Water
line inlet
location
(left
bottom
rear)
35
7
/8"
Cabinet
36"
Doors
45
1
/2"
(with drawer
fully extended
including handle)
42
1
/2" (with doors
90°
open)
Standard
Refrigerator Depth
vs. Counter Depth
23
7
/8"
Counter Depth
28
3
/4"
Standard Depth
B
C
A
French Door Refrigerators
FFHD2250T D / S 22.5 Cu. Ft. Counter-Depth