Installation Instructions

lose the microwave door. Plug in microwave

oven or reconnect power.

Rein stall the vent by sliding the bottom of the

ven t into place. Push the vent top into position

and slide right into place. Replace th e two ven t

moun ting screws located on top of th e microwave

using a #1 Phillips screwdriver.

IMPORTANT: Remove the cardhoard spacers between

heat shield and door.

Press the bottom of charcoal filter to place it

into the correct position.

Remove the PureAir Filter from the packaging

and sh ake filter to remove excess carbon.

Use a Phillips head screwdriver to unscrew the

PureAir Filter access door.

Open the filter access door.

Quick St art

Remove the existing PureAir Filter( if installed)

by pulling forward out from the unit.

EN-2

For models with th e recirculation filter access door

follow th ese steps to replace or install a PureAir

ilter.

FMicrowave