Installation Instructions

2
I MPORTANT SAFETY I NSTRUCTI ONS
Leveling
 Washer is level, side-to-side and front-to-back
 Cabinet is setting solid on all corners
Water Supply
 Use only new hoses and verify rubber sealing
washers are installed
 HOT supply is connected to HOT inlet and COLD
supply is connected to COLD inlet
 HOT and COLD water supply turned on
 No leaks present at water supply connections or
appliance inlet connections -
recheck in 24 hours
Drain
 Drain hose mounted securely to pump outlet with
supplied clamp (check for leaks)
 Drain hose snapped in “U” channel (shipped in
drum)
 Stand pipe or wall drain height minimum 39”
 Drain hose secured in place with cable tie (shipped
in tub)
Electrical Power
House power turned on
 Washer plugged in
Final Checks

Installation Instructions and Use and Care Guide
read thoroughly
 Water enters tub when cycle starts with lid lowered.
 Registration card sent in
I nstallation Checklist
Defi nitions
This is the safety alert symbol. It is used to alert you to
potential personal injury hazards. Obey all safety messages
that follow this symbol to avoid possible injury or death.
Recognize safety symbols, words and
labels
Safety items throughout this manual are labeled with a
WARNING or CAUTION based on the risk type as described
below:
I MPORTANT
IMPORTANT indicates installation, operation or maintenance
information which is important but not hazard-related.
WARNI NG
WARNING indicates a potentially hazardous situation which,
if not avoided, could result in death or serious injury.
WARNI NG
Please read all instructions before using this washer.
CAUTI ON
CAUTION indicates a potentially hazardous situation which,
if not avoided, may result in minor or moderate injury.
DANGER
DANGER indicates an imminently hazardous situation
which, if not avoided, will result in death or serious injury.