Installation Instructions

6
I MPORTANT
DO NOT I NSTALL YOUR WASHER:
1 In an area exposed to dripping water or outside
weather conditions. The ambient temperature should
never be below 60° F (15.6° C) to maximize detergent
effectiveness.
2 In an area (garage or garage-type building) where
gasoline or other fl ammables (including automobiles)
are kept or stored.
3 On carpet. Floor MUST be solid with a maximum
slope of 1 inch (2.5 cm). To minimize vibration
or movement, reinforcement of the fl oor may be
necessary.
I NSTALLATI ON REQUI REMENTS
MINIMUM INSTALLATI ON CLEARANCES - Inches (cm)
SIDES REAR TOP FRONT
Alcove
1”
(2.5 cm)
6”
(15.2 cm)
24”
(61 cm)
n/ a
Closet
1”
(2.5 cm)
6”
(15.2 cm)
24”
(61 cm)
2”
(5.1 cm)
Clearance requirements
27.0” (68.5 cm)
29.0” (73.6 cm)
38.5”
(97.5 cm)
44.2”
(112 cm)
59” (150 cm)
to clear open lid
1”
(2.5 cm)
1”
(2.5 cm)
2”
(5.1 cm)
6”
(15.2 cm)
24”
(61 cm)
Washer Dimensions
water supply
connection on
rear of washer
power cord
attachment location
on rear of unit
2
tuyau de vidange
à l’arrière de la
laveuse
1
1
Drain hose length on washer approximately 59 inches (150 cm).
2
Power supply cord length approximately 70.5 inches (180 cm).