Complete Owner's Guide

BEFORE SETTING SURFACE CONTROLS

PLACEMENT OF BURNER CAPS

Place a burner cap on each burner head, matching the

cap size to the head size. The cap for each burner has an

inner locating ring which centers the cap correctly on the

burner head. Be sure that all the burner caps and burner

heads are correctly placed BEFORE using your appliance.

Make sure each burner cap is properly aligned and level.

Turn the burner on to determine if it will light. If the

burner does not light, contact a Service Center. Do not

service the sealed burner yourself.

ATTENTION: Do not slide the burner caps on the

cooktop, doing so can damage the surface.

Burner Cap

Burner Head

Correct Burner Cap

Placement

Incorrect Burner Cap

Placement

Burner Cap Lip

IMPORTANT

For Proper Ignition: Burner Ring

Alignment Tab Must Align with Burner

Base Alignment Tab Slot

Burner Ring

Alignment Tab

Burner Cap

Burner Ring

Burner Base

Simmer Head

Burner Base

Alignment Tab Slot