Ice Kit Installation Instructions

6
1. Fasten the strain reliefs for green water line (B)
and for wiring harness (C) on each unit.
Water Line Final Connections
2. Attach the 2 adhesive support clips (F) and insert
the green water line and harness.
3. Loop the water line and wire harness in the center
of the 2 units.
B
C
FPO
Access
Cover
Water Valve
3 Coils
Water Valve
1 Coil
Access
Cover
F
4. Connect and turn on the home water supply.
5. Purge air from the water lines by dispensing
water from the refrigerator water dispenser. (See
WATER SUPPLY CONNECTION or AUTOMATIC
WATER DISPENSER in the Use and Care Manual
for details on water dispenser operation and
purging method).
NOTE
Test the water before sliding the units back into
the cabinet cutout.
NOTE
This installation does not require a water line
Y splitter.