Quick Start Guide

GETTING
started
WITH YOUR MULTI-DOOR REFRIGERATOR
REMEMBER
Your appliance control display
For the first 24 hours, we recommend setting the temperature at 37˚F (3˚C) for the fresh food compartment and
0˚F (-18˚C) for the freezer. After 24 hours, you can adjust the temperature control as desired.
*Control display varies by model.
YOU’RE IN CONTROL
1
Freeze Boost Prior to grocery shopping, we recommend you
activate Freeze Boost to lower the temperature and freeze food
faster. Freeze Boost will remain active for up to 24 hours.
2
Ice Maker Press and hold for 3 seconds to turn ice maker on/o.
When indicator is lit, ice maker is on.
3
Press and hold for 3 seconds to enable/disable the appliance
control display. While locked, no changes can be made until
unlocked.
4
Change Temperature Press either the + or - to adjust
the temperature setting for the refrigerator or freezer
compartment. Adjusting Temp illuminates until you reach the
desired temperature(s).
5
Power Outage illuminates and an alert sounds after a power
outage until you reset it by pressing any button.
6
Door Open illuminates and an alert sounds if the door is open
5+ minutes until you close the door.
7
Replace Water Filter illuminates when it’s time to change the
filter, generally every 6 months.
8
°F/°C allows you to switch between Fahrenheit (°F) and Celsius
(°C).
9
Replace Air Filters illuminates when it’s time to change the
filter(s), generally every 6 months.
1
2
3
4 5
6
7 9
8
1
Change
Temperature
Select Freezer or
Refrigerator compartment to
change temperature.
Select +/- buttons to set the
temperature
Freezer
control range:
-6˚F/-21˚C –
+6˚F/-15˚C
Refrigerator
control range:
+34˚F/+1˚C –
+44˚F/+7˚C
2
Clear Alerts Resets any active door
open, high temp or power
outage alarms on the control
display.
3
Freeze
Boost
Prior to grocery shopping,
we recommend you activate
Freeze Boost to lower the
temperature and freeze food
faster. Freeze Boost will remain
active for up to 24 hours.
4
F/C Touch to toggle display from
Fahrenheit to Celsius.
5
Default
Settings
Press and hold for 3 seconds
to reset to Factory settings.
6
7
Water Filter
Air Filters
Press and hold to reset after
filter has been replaced,
status shown at right of
button will reset to GOOD.
1
2
3 4
5
6
7
See the Use & Care Manual for more details on the control display.
Air Port
Air ports
Food placed within 1 inch
in front of the air ports may
cause food to freeze. See
Controls and Settings in your
Use & Care Manual.
BEFORE YOU START
Set up your refrigerator
Remove tape and glue residue from surfaces before turning on the refrigerator. Choose a place near
a grounded electrical outlet, allowing for clearances for ease of installation, proper circulation, and
plumbing and electrical connections.
Before operating for the first time
After removing all of the package materials, clean the inside of your refrigerator before using it. See
CARE AND CLEANING in the Use & Care Manual. To ensure safe food storage, allow the appliance to
operate with the door closed for at least 8 hours before loading it with food.
EXTERNAL DISPENSER CONTROL DISPLAY
INTERNAL DISPENSER CONTROL DISPLAY
A20832001 (2106)