Complete Owner's Guide

8
INSTALLATION
Guidelines for final positioning
of your unit:
• Rest all 4 corners of the cabinet
firmly on the floor.
• Level the cabinet at the front and
rear so the front is raised ¼" (6 mm)
above the rear to ensure the door will
open/close and seal properly.
• Align the doors with each other
and level.
Meet all of these conditions by
raising or lowering the adjust-
able leveling feet.
To level the cabinet using the leveling feet:
1. Open both doors and remove
the toe grille (see Toe Grille
Installation and Removal
in the
INSTALLATION section).
2. Level the cabinet at the front and
rear so the front is raised ¼ in. (6
mm) above the rear. Close the doors
and use a wrench to raise (clockwise)
or lower (counterclockwise) the front
leveling feet.
3. Ensure both doors are bind free
with their seals touching the cabinet
on all 4 sides.
1/4”
(6 mm)
1/4”
(6 mm)
2. If the freezer door is lower than
the refrigerator door (A) or the
refrigerator door is lower than the
freezer door (B), raise the door
by turning the adjustment screw
counterclockwise using a 12 mm
wrench.
To level the doors using the adjustable
lower hinge:
1. Before leveling either door, remove
the set screw that locks the door
height into position using a
3
/
32
hex key.
12 mm
A B
Set Screw
Tornillo de
fijacion
Vis fixe
3
/
32
"
3
/
32
"