Use and Care Guide
Table Of Contents
- Introduction
- Important Safety information
- Features
- Installation
- Door Removal
- Door Handle Installation
- Water Supply Connection
- Controls and Settings
- Automatic Ice and Water Dispenser
- Storage Features
- Normal Operating Sounds
- Filter replacement
- Care and Cleaning
- Troubleshooting
- Limited Warranty
- Blank Page
- Blank Page
- Blank Page
9
DOOR REMOVAL
To prepare for removing the doors:
1. Make sure the electrical power cord
is unplugged from the wall outlet.
2. Open both doors and remove the
toe grille (as explained in the Instal-
lation Instructions that came with
your appliance).
3. Remove any food from the door shelves.
4. Close the doors.
To remove the refrigerator top hinge/cover:
1. Remove the 2 screws from the cover
over the top door hinge.
2. Lift hinge cover straight up and o.
3. Trace lightly around the door’s top
hinge with a pencil. This makes
reinstallation easier.
4. Remove the 2 screws from the top
hinge and lift the hinge straight up.
Lift the door o of the bottom hinge
and set it aside.
5. Remove the 2 bottom hinge screws
and hinge if necessary.
Socket
Wrench Set
Adjustable
Wrench
Top Hinge
Cover Front
Screw
Top
Hinge
Screw
Bottom
Hinge
Screw
Top Hinge
Cover Rear
Screw
Phillips™
Head
Tools Necessary:
or
or
⅜" Fixed
Wrench
Phillips™
Head
&
Flathead
Screwdriver
To reinstall the refrigerator door, reverse
the above steps.
Door
Hinge
Assembly
Closer
Pin
Hinge
Screws
Adjustable Hinge