Complete Owner's Guide

10
DOOR REMOVAL/REVERSAL
6. Loosen the 2 outside screws on
the opposite side of refrigerator.
Remove the inside screw and install
the center hinge.
7. Remove the 2 screws on the bottom
hinge with a ⅜" socket wrench.
8. Install the bottom hinge on the
opposite side with the 2 screws
removed from step 7.
Door
Stop
Shim
Washer
Hinge
Pin
Center
Hinge
Screws
Hinge
Hole
Plug
Handle
Hole
Plug
Door
Stop
Screw
Washer
Hinge
Pin
Bottom
Hinge
Screws
Toe
Grille
Door Stop
Screw
Door
Stop
9. Unscrew the bottom hinge pin
using an adjustable wrench. Move
the hinge pin to the other hole
in the hinge and tighten with the
adjustable wrench.
10. Reverse door handles (see
instruction on the next page).
11. Move the freezer and refrigerator
door stops to the opposite side.
Before starting the screws, use an
awl to puncture the foam.
12. Position the refrigerator door onto
the bottom hinge pin and screw the
center hinge pin through the center
hinge into the top of the door. Close
the refrigerator door to help align
the hinge hole.
13. Tighten the center hinge pin with an
adjustable wrench.
14. Remove the cabinet and the
hinge hole plugs, and move to the
opposite side.
15. Lower the freezer door onto the
center hinge pin.
16. Close the freezer door. Lift up on
handle side of the door and grasp
the thinnest part of the top hinge
cover (which was removed in Step 2)
and insert the thickest part between
the doors on the handle side
approximately 3" from the outside
edge. This will ensure proper spacing.