Owner's Manual

8
Guidelines for final positioning of
your refrigerator:
• All 4 corners of the cabinet must rest
firmly on the floor.
• The cabinet should be level at the
front and rear.
• The sides should tilt ¼" (6 mm) from
front to back (to ensure that doors
close and seal properly).
• Doors should align with each other
and be level.
INSTALLATION

NOTE
Raise the front of the refrigerator
enough so the doors close freely when
opened halfway. The refrigerator should
slope ¼" to ½" from front-to-back. Then
level the refrigerator from side-to-side.
To level the cabinet using the front rollers:
Raise
9/16"
(14 mm)
Max
Figure 3
9/16"
(14 mm)
Max
Raise
Figure 2
3. Use an adjustable wrench to adjust
leveling screws. Lower the leveling
screws on each side clockwise until
they contact the floor (Figure 3). Do
not raise the cabinet more than
9
/
16
".
1. Remove the toe grille (Figure 1).
2. Use a flat-blade screwdriver or ⅜"
socket wrench to raise or lower the
front rollers (Figure 2). Do not raise
the cabinet more than
9
/
16
".
Figure 1