Installation Instructions

If the air conditoner is blocked by Storm Window, add wood as

shown in FIG. 5, or remove storm window before air conditioner

is installed.

If Storm Window Frame must remain, be sure the drain holes or

slots are not caulked or painted shut. Accumulated Rain Water

or Condensation must be allowed to drain out.

Storm Window:

FIG. 5

Board

thickness as

required, for

proper pitch to

rear, along

entire sill.

Fasten with

nails or screws.

Storm window

frame or other

obstruction.

SASH

1-1/2” min

(38 mm)

Installation

Keep a firm grip on the air conditioner, carefully place the unit into the window opening so the bottom of the air

conditioner frame is against the window sill (FIG. 6A & FIG. 6B). Carefully close the window behind the top rail

of the unit.

Place the frame lock between the frame extensions and the window sill as shown (FIG. 8A for wooden

windows), (FIG. 8B for Vinyl-Clad windows).

FIG. 8A FIG. 8B

:swodniw dalC-lyniV:swodniw nedoow

Extend the side panels out against the window frame (FIG. 7A for wooden windows), (FIG. 7B for Vinyl-Clad

windows).

FIG. 7A

window

frame

FIG. 7B

OUTSIDEINSIDE

FIG. 6B

Vinyl-Clad Windows

Wooden Windows

INSIDE

OUTSIDE

FIG. 6A