Use & Care Guide

19
CONTROLS AND SETTINGS
External Dispenser Features (Continued)
6
Adjusting Temp
Illuminates when temperatures are
changed on the display and will
remain illuminated until the desired
temperatures are reached inside
the refrigerator and freezer. Press
either the + or — to adjust to desired
temperature setting.
Freezer temp
Control temperatures range from
-6°F / -21°C to +6°F / -15°C.
Refrigerator temp
Control temperatures range from
+34°F / +1°C to +44°F / +7°C. This
unit is designed to operate at 37°F
Refrigerator/0°F Freezer. The unit
should stabilize temperatures within
24 hours of installation.
7
Door Open
Illuminates whenever the doors
are open. If a door is left open for
5 minutes or more, an alarm will
sound and the display will illuminate
until the doors are shut. Pressing
any button will mute the alarm
temporarily. Check to make sure no
food is blocking the doorway.
8
Replace Water Filter
Display illuminates every 6
months or when filter needs
replacing. Replace the filter and
then press and hold Reset Water
Filter for 3 seconds to deactivate
the warning on display. See
FILTER REPLACEMENT for more
information.
9
Replace Air Filters
Display illuminates every 6 months
or when filter needs replacing.
Replace the filter and then press
and hold Reset Air Filter for 3
seconds to deactivate warning on
display. See FILTER REPLACEMENT
for more information.
10
Water
Press Water to dispense water. An
indicator light will illuminate above
the active feature.
11
Cube
Press Cube to dispense cubed ice.
An indicator light will illuminate
above the active feature.
12
Crush
Press Crush to dispense crushed ice.
An indicator light will be illuminated
above the active feature.
13
°F/°C
To toggle between Fahrenheit (°F)
and Celsius (°C), simultaneously
press and hold + and — for 5 seconds
on the refrigerator side of display.
14
Chill Boost
Chill Boost is a faster rate for chilling
food in the refrigerator compartment.
Use this feature when loading several
items into the refrigerator at one
time. It deactivates after 6 hours.
15
Reset Air Filters
After replacing the filter, press and
hold for 3 seconds to reset.
16
Reset Water Filter
After replacing the filter, press and
hold for 3 seconds to reset.
17
Toggles dispenser light On and
O. Press and hold for 5 seconds
to enable ambient lighting. Once
enabled, press and hold for 2
seconds to disable ambient lighting
IMPORTANT
If food is freezing in the fresh food
compartment, increase the temperature
setting 1 or 2 degrees.
IMPORTANT
Food placed within 1 inch in front of the
air ports may cause food to freeze.

NOTE
The recommended settings for a product
installed in a kitchen is 37˚F for the fresh
food compartment and 0˚F for the freezer.