Use and Care Guide

5
Ice Maker Installation Instructions (without access cover)
19. Remove the connector box from the unit with a
Philips screwdriver.
20. Open the connector box using a at head screwdriver.
Insert at the notched point and turn. Insert the water
valve in the hole in the box.
21. Connect the valve wire harness with the AC connector.
Insert the wiring in the box as shown. Close the box
cover completely, ensuring all wiring is inside.
23. Attach the water valve bracket to the unit at the 2 pre-
drilled holes using the 2 screws included in the kit.
22. Plug the water tube from the unit into the bottom outlet
of the water valve. The tube should be pushed into the
valve up to the black line marked in the tube.
24. Connect the household water line to the water valve.
Follow instructions on page 7.