Product Manual

DATCOM Checking data communications, entering the inverter number, DATCOM night mode, pro-

tocol settings

Status

Indicates data communication is taking place via a Fronius Solar Net or that a data com-

munications error has occurred

Inverter number

Sets the number (= address) of the inverter in a system with several solar inverters

Protocol type

Specifies the communications protocol to be used to transfer the data:

* The protocol type 'interface protocol' only functions when there is no Datamanager card

in the inverter. All Datamanager cards must be removed from the inverter.

USB Specification of values in conjunction with a USB stick

Safely remove hardware

To remove a USB stick from the USB A socket on the plug-in data communications card

without losing any data.

The USB stick can be removed:

- when the OK message appears

- when the 'Data transfer' LED stops flashing or comes on steady

Software Update

To update the inverter software via a USB stick.

Procedure:

Download the relevant update file 'froxxxxx.upd'

(e.g. from http://www.fronius.com; xxxxx stands for the version number)

***

WiFi Access Point

[not available]

Displayed if there is no system monitoring present on the invert-

er.

Setting range Status / inverter number / protocol type

Setting range 00 - 99 (00 = 100th inverter)

Factory setting 01

IMPORTANT! If a number of inverters are linked together in a data communications sys-

tem, assign a unique address to each one.

Setting range Fronius Solar Net / interface protocol *

Factory setting Fronius Solar Net

Setting range Safely remove hardware / Software update / Logging interval