Product Manual

Save the update file to the highest data level of the USB stick

Open the data communication area

Plug the USB stick containing the update file into the USB socket in the data commu-

nication area

Select 'USB' from the Setup menu, followed by 'Update software'

Press the 'Enter' key

Wait until the version currently installed on the inverter and the new software version

are displayed for comparison:

- 1st page: Recerbo software (LCD), key controller software (KEY), country setup

version (Set)

- 2nd page: Power stage set software

Press the 'Enter' key after each page

The inverter starts copying the data.

'UPDATE' and the progress of storing the individual tests expressed in % are displayed un-

til all the data for all the electronic modules has been copied.

Once copying is complete, the inverter updates the electronic modules as required in se-

quence.

'UPDATE', the affected modules and the update progress in % are displayed.

The final step is for the inverter to update the display.

The display remains dark for approx. 1 minute while the monitoring and status LEDs flash.

Once the software update is complete, the inverter enters its startup phase before going

on to start feeding energy into the grid. The USB stick can be unplugged.

When the inverter software is updated, any custom settings that were configured in the

Setup menu are retained.

IMPORTANT! In order for the logging function to work correctly the time must be set cor-

rectly.

NOTE! To successfully update the inverter software, the USB stick provided for

the purpose must not have a hidden partition or any encryption (see chapter "Suit-

able USB sticks").

Logging interval

Activate / deactivate the logging function and specify a logging interval

Unit Minutes

Setting range 30 min. / 20 min./ 15 min./ 10 min./ 5 min./ No log

Factory setting 30 min.

30 min. The logging interval is 30 minutes; every 30 minutes new log-

ging data will be saved on the USB stick.

20 min.

15 min.

10 min.

5 min. The logging interval is 5 minutes; every 5 minutes new logging

data will be saved on the USB stick.

No log No data is saved