Product Manual

31
EN
Summer/winter time
Activate / deactivate automatic changeover between summer and winter time
IMPORTANT! The correct time and date is a prerequisite for the correct display of day and
year values and the day characteristic.
Display settings
Language
Set language for display
Night mode
DATCOM night mode; controls the DATCOM and display operation during the night or
when the DC voltage is insufficient
Setting range 12hrs / 24hrs
Factory setting Depends on country setup
Date display format
for specifying the date display format
Setting range mm/dd/yyyy / dd.mm.yy
Factory setting Depends on country setup
NOTE! Only use the automatic summer/winter time changeover function if the
Fronius Solar Net ring does not include any LAN- or WLAN-compatible system
components (e.g. Fronius Datalogger Web, Fronius Datamanager or Fronius Hy-
bridmanager).
If it does include such system components, then this function should be switched
on using the system component's web interface.
Setting range on / off
Factory setting on
Setting range Language / Night mode / Contrast / Lighting
Setting range German, English, French, Dutch, Italian, Spanish, Czech, Slo-
vak, etc.
Setting range AUTO / ON / OFF
Factory setting OFF
AUTO: DATCOM mode is always in effect as long as there is a Datalogger connect-
ed in an active and uninterrupted Fronius Solar Net.
The display remains dark during the night, but can be activated by pressing
any key.