iCommand-Touch Manual

CAP-837
2 I
COMMAND -
TOUCH
2.1
Overview of the ICOMMAND
2.2
Brief description
iCommand
11
TOUCH
Overview of the ICOMMAND
- TOUCH
No. Key/icon
Description of function
1 Display
Displays settings and operating
parameters.
2
Serves to switch on the compre
sor.
3
Serves to switch off the compre
sor.
During the start,
the control displays for about three seconds
come screen.
The display changes automatically to the basic display.
The control unit has a resistant color touch screen. A slight tap on the
respective operating controls -
using a finger or stylus
perform the desired entry. Glove operation is also possible.
Brief description
The ICOMMAND - TOUCH controller serves
 to display operating data
 to switch on/off the compressor
 to program the compressor
iCommand – Touch
iCommand
- Touch
Description of function
Displays settings and operating
Serves to switch on the compre
s-
Serves to switch off the compre
s-
the control displays for about three seconds
, a wel-
The display changes automatically to the basic display.
The control unit has a resistant color touch screen. A slight tap on the
using a finger or stylus
- is sufficient to
perform the desired entry. Glove operation is also possible.