iCommand-Touch Manual

CAP-837
System state
The current state of the system is shown in all display pages in the
upper left corner via the following three symbols:
No message is
tions flawlessly.
As soon as a warning or maintenance message is present, the smiley
face is replaced by a flashing warning triangle.
The flashing tool signals a fault (the compressor is switched
Messages are also shown in the system diagram in order to detect the
source location of the warning, maintenance or fault. Below the sy
tem diagram a status line is located, which provides constant info
mation about the operating mode of the system.
Navigation
Navigation of the individual screens is done via the button in the title
line:
The
page (not available in the basic display). A possibly earlier entered
code is deleted.
The arrow to the left leads, depending on context, backs a page or
level.
The arrow to the right leads, depending on context, one page further.
iCommand
16
The current state of the system is shown in all display pages in the
upper left corner via the following three symbols:
No message is
present, if the smiley face is shown. The system fun
tions flawlessly.
As soon as a warning or maintenance message is present, the smiley
face is replaced by a flashing warning triangle.
The flashing tool signals a fault (the compressor is switched
Messages are also shown in the system diagram in order to detect the
source location of the warning, maintenance or fault. Below the sy
tem diagram a status line is located, which provides constant info
mation about the operating mode of the system.
Navigation of the individual screens is done via the button in the title
line:
The
"Home"
button leads back to the basic display from any display
page (not available in the basic display). A possibly earlier entered
code is deleted.
The arrow to the left leads, depending on context, backs a page or
level.
The arrow to the right leads, depending on context, one page further.
iCommand – Touch
iCommand
- Touch
The current state of the system is shown in all display pages in the
present, if the smiley face is shown. The system fun
c-
As soon as a warning or maintenance message is present, the smiley
The flashing tool signals a fault (the compressor is switched
off).
Messages are also shown in the system diagram in order to detect the
source location of the warning, maintenance or fault. Below the sy
s-
tem diagram a status line is located, which provides constant info
r-
Navigation of the individual screens is done via the button in the title
button leads back to the basic display from any display
page (not available in the basic display). A possibly earlier entered
The arrow to the left leads, depending on context, backs a page or
The arrow to the right leads, depending on context, one page further.