iCommand-Touch Manual

CAP-837
Parameter
Value setting/Initial setting/Remarks
Setting range: Yes/No
Initial setting: No
Starting temp.
heating
Specifies the switch
system (programmable output).
Setting range: 36 °F
Initial setting: 36
Shut-down temp.
heating
Specifies the switch off
system (programmable output).
Setting ra
nge: Starting temp. heating
Initial setting: 46
Starting temp.
ventilation
Specifies the starting temperature For the ventilator
(programmable output).
Setting
range: Shut
194 °F
Initial setting: 149
Shut-down temp.
ventil.
Specifies the switch off temperature for the ventilator
(programmable output).
Setting range: 32°F
Initial setting:
Starting temp.
circulation
Specifies the switch
tion (compressor start without prompt).
Setting range: 34 °F
Initial setting: 59
Shut-down temp.
circul.
Specifies
the switch
tion (off-
load without prompt).
Setting range: Starting temp.
Initial setting: 59
iCommand
41
Value setting/Initial setting/Remarks
Compressor
type
Setting range: Yes/No
Initial setting: No
Specifies the switch
-on temperature for the heating
system (programmable output).
Setting range: 36 °F
– Shut-down temp. heating
Initial setting: 36
°F
All
Specifies the switch off
temperature for the heating
system (programmable output).
nge: Starting temp. heating
– 176 °F
Initial setting: 46
°F
All
Specifies the starting temperature For the ventilator
(programmable output).
range: Shut
-down temperature ventilation –
Initial setting: 149
°F
All
Specifies the switch off temperature for the ventilator
(programmable output).
Setting range: 32°F
– Starting temp. ventilation
Initial setting:
122 °F
All
Specifies the switch
-on temperature for the circula-
tion (compressor start without prompt).
Setting range: 34 °F
– Shut-down temp. circul.
Initial setting: 59
°F
All
the switch
-on temperature for the circula-
load without prompt).
Setting range: Starting temp.
circulation – 68 °F
Initial setting: 59
°F
All
iCommand – Touch
iCommand
- Touch
Compressor
State
Display
Display
Display
Display
Display
Display