iCommand-Touch Manual

CAP-837
2.7.7
"Fault log" menu
Fig. 48: "Messages" menu for massages,
faults and maintenance
The last 20 messages are stored in the message memory. Here, the
newest messages appear first. Using the arrow buttons (
scroll to older messages.
For each entry the following information is available:

Entry number

Warning or fault symbol

Time

Message in plain text
Currently still waiting
flashing.
A new occurring message replaces the older entry once the message
memory is full.
2.7.8
"Diagnostics" menu
Fig. 49: "Diagnostics" screen
This menu contains the current states of the
digital inputs and outputs.
When selecting this screen with the service code you can switch the
outputs on and off by tap. Due to safety reasons only the
be active.
"LLC" menu
2.7.9
"LLC configuration" screen
Fig. 50: "LLC configuration" screen
(overview)
In this menu the settings for the lead lag control can be performed.
iCommand
44
"Fault log" menu
The last 20 messages are stored in the message memory. Here, the
newest messages appear first. Using the arrow buttons (
scroll to older messages.
For each entry the following information is available:
Entry number
Warning or fault symbol
Time
the message cause appeared
Message in plain text
Currently still waiting
-
meaning not confirmed messages
flashing.
A new occurring message replaces the older entry once the message
memory is full.
"Diagnostics" menu
This menu contains the current states of the
ICommand
digital inputs and outputs.
When selecting this screen with the service code you can switch the
outputs on and off by tap. Due to safety reasons only the
be active.
"LLC configuration" screen
In this menu the settings for the lead lag control can be performed.
iCommand – Touch
iCommand
- Touch
The last 20 messages are stored in the message memory. Here, the
newest messages appear first. Using the arrow buttons (
/ )
meaning not confirmed messages
- are shown
A new occurring message replaces the older entry once the message
ICommand
- Touch P
When selecting this screen with the service code you can switch the
outputs on and off by tap. Due to safety reasons only the
output can
In this menu the settings for the lead lag control can be performed.