iCommand-Touch Manual

CAP-837
1.4.2
Description of the installed
safety devices
Emergency stop button
Fig. 2: Emergency stop button
By pressing the
emergency stop button
chine is stopped by an immediate switching off of
the power supply. After an
emergency stop button
has been pressed, it must be u
nlocked by turning it
so that switching on is possible.
WARNING!
Danger to life from an
unauthorized
restart!
An uncontrolled restart of the machine
may cause serious injuries including
death.
-
Before switching the machine back
on, make sure the cause of the
emergency stop has been removed
and all safety devic
es have been
installed and function properly.
-
Do not unlock the EMERGENCY
STOP button until there is no more
danger.
Relief valves
Relief valves a
re unburdening equipment for
under pressure such as boilers
, pressure
and pipes. In case of an im
permissible
increase, relief
valves bleed off gases,
liquids into the atmosphere.
8
Description of the installed
emergency stop button
, the ma-
chine is stopped by an immediate switching off of
emergency stop button
nlocked by turning it
unauthorized
An uncontrolled restart of the machine
may cause serious injuries including
Before switching the machine back
on, make sure the cause of the
emergency stop has been removed
es have been
installed and function properly.
Do not unlock the EMERGENCY
-
STOP button until there is no more
re unburdening equipment for
areas
, pressure
vessels
permissible
pressure
valves bleed off gases,
vapors or
Do not change the pressure setting of the pre
sure relief valve, restrict the
lief valve or replace
the relief valve with a plug.
1.5
Environmental protection
NOTICE!
Danger to the environment from
incorrect handling of pollutants!
Incorrect handling of pollutants,
particularly incorrect waste disposal,
may cause serious damage to the
environment.
- Al
ways observe the instructions
below regarding handling and
disposal of pollutants.
-
Take the appropriate actions
immediately if pollutants escape
accidentally into the environment. If
in doubt, inform the responsible
municipal authorities about the
damage
and ask about the
appropriate actions to be taken.
The following chemical
s are used:
Oil
Oil
s can contain substances that are harmful to the
environment. They must not be allowed to escape
into the environment.
Catch replaced oils in suitable
containers and dispose of in accordance with appl
cable
local, state and federal regulations
Lubricants
Lubricants such as greases and oils
harmful
substances. They must not be allowed to
escape into the environment.
in accordance with applicable
eral regulations.
Safety
Do not change the pressure setting of the pre
s-
sure relief valve, restrict the
function of the re-
the relief valve with a plug.
Environmental protection
Danger to the environment from
incorrect handling of pollutants!
Incorrect handling of pollutants,
particularly incorrect waste disposal,
may cause serious damage to the
ways observe the instructions
below regarding handling and
disposal of pollutants.
Take the appropriate actions
immediately if pollutants escape
accidentally into the environment. If
in doubt, inform the responsible
municipal authorities about the
and ask about the
appropriate actions to be taken.
s are used:
s can contain substances that are harmful to the
environment. They must not be allowed to escape
Catch replaced oils in suitable
containers and dispose of in accordance with appl
i-
local, state and federal regulations
Lubricants such as greases and oils
can contain
substances. They must not be allowed to
Dispose of lubricants
in accordance with applicable
local, state and fed-