iCommand Manual

CAP-836
2.4
Display structure
Overview
Fig. 4: Overview of basic display
2.4.1
Other display indicators
iCommand
13
Display structure
The display shows all operation-
relevant information such as the
parameters set.
1
Display Current network pressure: Displays
the current network
pressure.
2
Display Current compressor temperature
: Displays the current
compressor temperature.
3
Operating mode
display: Displays the current operating mode.
By pressing the
key, the current oil liquid
temperature can also be shown on the C
compressor temperature display.
Other display indicators
The following symbols can also appear on the display:
Symbol Description
Motor is running.
Compressor is compressing air.
Fault present.
Automatic restart after power failure is activated.
Flashing: compressed air generation on/off via remote
switch.
Static: compressed air generation is
superior controller.
Warning/maintenance message present.
iCommand
- Basic
relevant information such as the
the current network
: Displays the current
display: Displays the current operating mode.
key, the current oil liquid
temperature can also be shown on the C
urrent
The following symbols can also appear on the display:
Automatic restart after power failure is activated.
Flashing: compressed air generation on/off via remote
Static: compressed air generation is
controlled by
Warning/maintenance message present.